Interface India Pvt Ltd

Email: sales@interfaceindia.in

98220 40055

Products & Services

Signal & Spectrum Analyzer

R&S®FSW Signal and Spectrum Analyzer

Frequency range from 2 Hz to 8 /13.6 /26.5 /43.5 GHz
Low phase noise of –137 dBc (1 Hz) at 10 kHz offset (1 GHz carrier)
–88 dBc dynamic range (with noise cancellation) for WCDMA ACLR measurements
Up to 160 MHz analysis bandwidth
< 0.4 dB total measurement uncertainty up to 8 GHz
High-resolution 12.1" (31 cm) touchscreen for convenient operation
Multiple measurement applications can be run and displayed in parallel

R&S®FSU Spectrum Analyzer

3.6/8/26/43/46/50/67 GHz
TOI > 20 dBm, typ. +25 dBm
1 dB compression: +13 dBm (0 dB RF attenuation)
Displayed average noise level: –152 dBm at 2 GHz; –148 dBm at 26 GHz (1 Hz bandwidth)
Typ. 77 dB ACLR for 3GPP, typ. 84 dB with noise correction
Phase noise: typ. –160 dBc (1 Hz) at 10 MHz carrier offset
Noise correction

R&S®FSQ Signal Analyzer

Frequency range from 20 Hz to 3.6/8/26.5/40 GHz
28 MHz signal analysis bandwidth, optionally 120 MHz
Outstanding RF characteristics:
    •  TOI typ. +25 dBm
    •  1 dB compression point +13 dBm
    •  84 dBc ACLR/3GPP with noise correction
    •  –173 dBm (1 Hz) displayed average noise level (DANL) with noise correction andR&S®FSU-B24 preamplifier
Analysis of signals in the analog and digital baseband
Numerous firmware applications extending the signal analysis capabilities
16 Msample I/Q memory, expandable up to 705 Msample

R&S®FSMR Measuring Receiver

Frequency range from 20 Hz to 3/26.5/43/50 GHz
Highly accurate level calibrator with wide measurement range from +30 dBm to –140 dBm
Highly accurate level calibrator
Modulation analyzer
Audio analyzer with THD and SINAD measurement functionality
Power meter for connection of R&S®NRP-Zxxpower sensors
High-performance spectrum analyzer

R&S®FSUP Signal Source Analyzer

Frequency range up to 8 GHz, 26.5 GHz or 50 GHz (up to 110 GHz with external mixers)
Maximum dynamic range through cross-correlation
Analysis of settling in time domain
Oscillator characterization
Detection, suppression and listing of interference
Maximum flexibility for phase noise measurements
Low-noise source for supply and tuning voltages
Analysis of signals with digital and analog modulation

R&S®FMU36 Baseband Analyzer

FFT-based spectrum analyzer with 36 MHz bandwidth
Analog baseband input: balanced/unbalanced, 50 Ω/1 MΩ
Digital I/Q interface (optional)
Time domain analyzer
Efficient vector signal analyzer for all-purpose demodulation and analysis of digital signals
High sensitivity also at low frequencies
Measurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc.
Measurement applications for cellular standards, wireless connectivity standards and general purpose, e.g. phase noise, noise figure, etc.

R&S®FSVR Real-Time Spectrum Analyzer

Frequency range from 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz
40 MHz real-time analysis bandwidth for:
    •  Spectrum with persistence function
    •  Spectrogram display
    •  Display of power versus time
Triggering on frequency masks
Measurement applications for cellular standards, wireless connectivity standards and general purpose, e.g. phase noise, noise figure, vector signal analysis, etc.
Frequency range up to 110 GHz with theR&S®FSVR30 or R&S®FSVR40, theR&S®FSV-B21 option and the R&S®FS-Z60/-Z75/-Z90/-Z110 harmonics mixers

R&S®FSV Signal and Spectrum Analyzer

Frequency range up to 3.6/7/13.6/30/40 GHz
40 MHz signal analysis bandwidth
0.4 dB level measurement uncertainty up to 7 GHz
Measurement applications for GSM/EDGE (including EDGE Evolution), WCDMA/HSPA+, LTE, WiMAX™, WLAN, CDMA2000®, 1xEV-DO, vector signal analysis
Easy on-site upgrading with options
–110 dBc (1 Hz) phase noise at 10 kHz frequency offset
+15 dBm third order intercept (TOI)
Displayed average noise level (DANL) in 1 Hz bandwidth: –155 dBm at 1 GHz, –147 dBm at 30 GHz, with R&S®FSV-B24 preamplifier:– 162dBm at 30 GHz
Removable hard drive for applications where security is a concern
Frequency range up to 110 GHz with theR&S®FSV-B21 option integrated in theR&S®FSV30/40 and theR&S®FS-Z60/-Z75/-Z90/-Z110 harmonics mixers

R&S®FSP Spectrum Analyzer

Resolution bandwidth 1 Hz to 10 MHz
Displayed average noise level -155 dBm (1 Hz)
Phase noise -113 dB (1 Hz) at 10 kHz
Additional filters:
    •  Channel filters from 100 Hz to 5 MHz and RRC filters
    •  FFT filters from 1Hz to 30 kHz
    •  EMI bandwidths and quasi-peak detector
Measurement functions for TOI, MC ACP(R), OBW, CCDF, APD, etc
Measurement applications for cellular standards and general purpose, e.g. phase noise, noise figure, etc..

R&S®FSL Spectrum Analyzer

Frequency range 9 kHz to 3 GHz, 6 GHz or 18 GHz
Models with and without tracking generator
Signal analysis bandwidth of 28 MHz
Low measurement uncertainty, even in microwave range
General measurement applications, e.g. spectrogram
Lightweight and compact for on-site installation, maintenance and service
Optional battery operation
Easy on-site upgrading with options

R&S®ZVH Cable and Antenna Analyzer

Frequency range from 100 kHz to 3.6 GHz or 8 GHz
100 dB (typ.) dynamic range for filter and antenna isolation measurements
Built-in DC voltage supply (bias) for active components such as amplifiers
Power meter option
Saving of measurement results on SD memory card or USB memory stick
Easy operation with user-configurable test sequences (wizard)
Easy-to-replace Li-ion battery for up to 4.5 h of operation
Rugged, splash-proof housing for rough work in the field
Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys

R&S®FSH4 / R&S®FSH8 Spectrum Analyzer

Frequency range from 9 kHz to 3.6 GHz or 8 GHz
High sensitivity (< –141 dBm (1 Hz), with preamplifier < –161 dBm (1 Hz))
20 MHz demodulation bandwidth for analyzing LTE signals
Low measurement uncertainty (< 1 dB)
Measurement functions for all important measurement tasks related to the startup and maintenance of transmitter systems
Internal tracking generator and VSWR bridge with built-in DC voltage supply (bias)
Two-port network analyzer
Rugged, splash-proof housing for rough work in the field
Easy handling due to low weight (3 kg with battery) and easy-to-reach function keys
Easy operation thanks to user configurable, automatic test sequences (wizard)

R&S®FSH3 / R&S®FSH18 Spectrum Analyzer

Frequency range up to 3 GHz or 18 GHz
Easy operation, low weight and rugged design for field use
Four hours operating time on battery power
Storage of up to 256 traces and setups
Easy data transfer to PC
High measurement accuracy

R&S®FSC Spectrum Analyzer

Frequency range 9 kHz to 3 GHz or 6 GHz
Resolution bandwidths 10 Hz to 3 MHz
High sensitivity (< –141 dBm (1 Hz), with optional preamplifier < –161 dBm (1 Hz ))
High third order intercept (> 10 dBm, typ. 15 dBm)
Low measurement uncertainty (< 1 dB)
Internal tracking generator (model .13/.16)
Low power consumption (12 W)

Find more info about ROHDE & SCHWARZ product at www.rohde-schwarz.com